PTFE-lined wafer type valve for chemicals and high-corrosive media.

Double flanged PTFE-lined butterfly valve for Shut-off and Control Services in the...

A high-performance wafer type valve suitable for high pressure and high temperature...

PTFE-lined lug type valve for chemicals and high-corrosive media.

High-performance wafer type valve with two piece shaft and ANSI 150 Pressure/Temperature...

A high-performance lug type valve suitable for high pressure and high temperature...

A universally applicable wafer type valve manufactured acc. to EN 593.A wide range of...

A universally applicable butterfly valve with vulcanised liner according to EN 593....

A lug type butterfly valve for end of line applications.

A universally applicable butterfly valve with vulcanised liner according to EN 593....

A double flanged valve in short construction designed for heavy duty services.

A double flanged valve with vulcanised liner suited for haevy duty services such as...

Compact positioner for assembly with rotary and linear actuators with digital display.

The positioner EP 200 is controlled by micro processor and is designed to operate and...

The analog positioner EP 100 with input signal 4..20 mA serves to activate single or...

The new switch box generation SBU (Switch Box Unit) is designed to be directly mounted on...

Smart Valve Monitoring via Bluetooth interface. Continuous checking of the main functions...

A wafer type process valve with a vibrator mounted on the lower shaft. The disc is set...

The sealing system was developed for use with highly abrasive or very sensitive...

EBRO cycle-locks are installed where powdered media is discharged from silos, receiver...

The metallic sealing version (CK-M) has an airspace between disc and body. This series is...

The series TW-M provides a light metal body with a stainless steel insert ring instead of...

The impeller valve series FS is designed for a safe and consistent discharge of rapid...

A plastic valve with socket ends for low pressure applications in plastic pipes.

A pinch valve to be used in bulk loaded wastewater or slurries.

Q011 double seat valves are designed for isolation/control in high purity air...

A butterfly valve designed with both ends suitable for clamping rings.

These valves are designed to be used with tankers, silos and road vehicles.

These valves are designed to be used with tankers silos and road vehicles.

A valve Series especially designed to be used with silos and containers.

A valve series especially designed to be used with silos and containers.

Electric quarter turn actuators series E 65 – E 210 with modularsystem are designed...

A compact series of actuators for open/close and control functions.

This series of linear pneumatic actuators is designed to automate knife gate valves....

The scotch-yoke principle in the EB actuators exactly matches the valve torque...

The scotch-yoke principle in the EB actuators exactly matches the valve torque...

Lug type butterfly valve in double-eccentric construction. Reliable sealing even with...

Double-flanged butterfly valve in double-eccentric construction. Reliable sealing even...

High Performance Valve for the chemical industry.

High-performance lug type valve with 2-piece shaft and ANSI 150 Pressure/Temperature...

PTFE-lined lug type valve for toxic and highly corrosive media.Specially designed for the...

PTFE-lined wafer type valve for toxic and highly corrosive media.Specially designed for...

Resilient seated double flanged butterfly valve for semi-corrosive media with split body.

A light weighted wafer type valve is especially designed for water treatment plants in...

The full flange design of this valve series provides spaceless sealing with the...

Butterfly valve with centre flange enables the one side lugging of the pipe. Due to the...

Valve with split stainless steel body for use in the food and beverage industry.

Valve with split stainless steel body for use in the food and beverage industry.

Lug type butterfly valve for shut-off and control services in the chemical industry.

Wafer type butterfly valve for shut-off and control services in the chemical industry.

Lug type valve with splitted body and disc and shaft in one piece.

Wafer type valve with 2-piece body and disc and shaft in one piece.

The reduced inner diameter of this lug type valve is suited to be installed in PE/PP...

The reduced inner diameter of this wafer type valve is suited to be installed in PE/PP...

A double flanged valve in short construction designed for haevy duty services.

A double flanged valve suited for heavy duty services such as shipbuilding and wastewater...

The special liner of this wafer type valve is suitable for applications with abrasive...

A lug type butterfly valve for end of line applications.

A lug type butterfly valve for end of line applications.

A unique valve series with integrated thermometer for media temperature control.

A light weighted wafer type valve to be used in public swimming pools.

A double check valve for industrial plants and civil engineering.

Resilient seated butterfly valve especially designed for water applications. Certified by...

A resilient seated valve designed for gas applications.Certified by DVGW .

A universally applicable check valve for horizontal and vertical installation.

A unique valve series with integrated thermometer for media temperature control.